Sale
VeloAngle Accessories

VeloAngle Accessories

You must be logged in to be able to place orders

EXPANDING CRANK ADAPTER

This adapter expands into cranksets designed with hollow shaft exposing a large opening at their centerline.

The pin extending from the adapter provides a stable reference point for VeloAngle to rotate between saddle and handlebar measurements. Because this measurement point is fixed and aligned with the crank axis, the saddle and handlebar adapter straps are not required to maintain tool orientation.

LASER ADAPTER

This adapter permits non-contact measurement from the crankset/BB by shining a mini laser onto the desired measurement point. This greatly increases the number features that can be measured as there is no access restriction other than a line-of-sight. It is particularly helpful for bike shops and fitters for frame sizing and component selection. To maintain VeloAngle’s orientation perpendicular to the BB axis, the Laser Adapter should be used in conjunction with one of the four available fixed-pin crankset adapters.

SHIMANO HOLLOWTECH II / M20 X 1.0 THREAD ADAPTER

This adapter was developed primarily for Shimano Hollowtech II road cranksets which are not compatible with the Expanding Crank Adapter.

The pin extending from the adapter provides a stable reference point for VeloAngle to rotate between saddle and handlebar measurements. Because this measurement point is fixed and aligned with the crank axis, the saddle and handlebar adapter straps are not required to maintain tool orientation.

SADDLE-HANDLEBAR ADAPTER

This adapter allows measurement of non-round handlebars, provides the option of measuring from saddle to handlebars, and increases the opportunity to measure other features such as TT bar extensions and armrest pads subject to clearance 

PEDAL THREAD ADAPTER

This adapter provides measurement from the drive-side pedal threads.  Tightening the included nut allows VeloAngle to maintain alignment with the crank arm.

M22 THREAD ADAPTER FOR SQUARE TAPERED & SPLINED NON-EXTRACTING CRANK ARMS

This adapter is compatible with older and entry-level cranksets containing cranks arms removed with a crank puller (rather than integrated self extracting bolts). The adapter engages the M22x1.0 threads used by the crank puller when the crank bolt is removed.

The pin extending from the adapter provides a stable reference point for VeloAngle to rotate between saddle and handlebar measurements. Because this measurement point is fixed and aligned with the crank axis, the saddle and handlebar adapter straps are not required to maintain tool orientation.

WHEEL CENTERING BAND

This strap is looped uround the down tube and wheel to keep the handlebars inline when taking measurements on a bike where the wheel is not centered.  It's also handy when doing maintenance or transporting to prevent the front wheel from flopping around. 

Customers who bought this product also bought